[Tutorial] How to install Android 5.0.1 Official Soak Test ZIP for Moto G XT1033 1st Gen :
Note:
Note:
-This update will only work if you have Android 5.0 Soak Test Installed in your system.
-Your Phone should not be rooted.
If you are on Indian Firmware 5.0 or any other kitkat firmware in world:
Follow these steps - http://www.allfreeperks.in/2014/12/ota-download-moto-g-xt1033-brazil-india.html
- After Installing Brazil 5.0 Firmware , go on and follow the below given guide
If you are on Brazil Firmware 5.0 , go for 5.0.1 zip OTA update :
Download this - https://docs.google.com/file/d/0Bwray3U603G8TklaOEhXM3NqVVE/edit
Steps to Flash Lollipop 5.0.1 OTA :
1) Turn off you phone & boot it into bootloader mode by holding ' Volumed Down + Power ' for 3 seconds.
2) You will be provided with the below options
Navigate & highlight Recovery using Volume Down button & press Volume Up button only once.
3) Now you'll come up with the following screen. Don't hesitate its common.Just carefully press ' Volume Up+ Volume Down + Power ' for 3-5 seconds & release the buttons which will reveal new options on the screen.
4) Now select the option apply update from SD card & select the OTA file which you've copied earlier
5) Now the update starts, wait for a while it will take 15 minutes to update & Voila you finally managed to get lollipop on your device.
1) Turn off you phone & boot it into bootloader mode by holding ' Volumed Down + Power ' for 3 seconds.
2) You will be provided with the below options
Code:
Normal Powerup Recovery Factory Barcodes BP Tools
3) Now you'll come up with the following screen. Don't hesitate its common.Just carefully press ' Volume Up+ Volume Down + Power ' for 3-5 seconds & release the buttons which will reveal new options on the screen.
4) Now select the option apply update from SD card & select the OTA file which you've copied earlier
5) Now the update starts, wait for a while it will take 15 minutes to update & Voila you finally managed to get lollipop on your device.
Proof:
Post a Comment